Job DetailsJob Location: Henderson, NV 89044Salary Range: $19.00 - $19.00 Hourly
Summary
Assembler in Training Salary: $19.00/ Hr.
As the largest machine tool builder in the western world, we need world-class talent in all of our departments. And we’re not just looking for people for the production floor. Haas is a very vertically integrated company, with a wide range of high-tech career opportunities available.
Oh, and yes, we are the same Haas that owns the Haas Factory Racing Team, and Haas F1 Team from the Netflix series: Drive to Survive.
The Assembler in Training assembles components and machine tools under direct supervision. This position is responsible for following work instructions, handling materials, and completing basic to intermediate assembly tasks to ensure quality and production schedules are met.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Access and follow daily and weekly production schedules.
Find, read, and follow electronic work instructions (via iPad).
Perform assembly responsibilities, including:
Pulling and packaging parts and materials (kitting).
Connecting and assembling small parts (sub-assembly).
Moving material and washing parts (material handling).
Basic wiring and panel assembly (enclosure).
Packing and cleaning finished components.
Correctly use all required gauges, tools, and equipment.
Identify potential problems and escalate to supervisor.
Operate powered and non-powered material handling equipment including carts, forklifts, pallet jacks, cranes, and mobile straddle stacker lifts.
Follow all safety and quality standards.
Report any equipment or material damage to management.
• Employees are expected to follow instructions, procedures and to escalate any issue impacting workflow, quality, etc.
• Employees must exhibit honesty and integrity as well as demonstrate adherence to rules, procedures and policies.
Qualifications
Qualifications
To perform this job successfully the candidate must be able to perform each essential duty adequately. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Minimum Qualifications
Able to work overtime and Saturdays when business conditions require it.
Desired Qualifications
Basic knowledge of fasteners, threads, and torque wrench use.
Basic knowledge of Bill of Materials (BOMs).
High school diploma or GED.
Experience with electronic devices (iPad).
Education
High school diploma or high school equivalency (HSE) credential such as general education degree (GED) is preferred
Preferred Major
Minimum Years of Experience
0-1 year
Language Skills
Must have the ability to read, write, and comprehend instructions and safety rules; such as work instructions, short correspondence, and memos in English. Must be able to effectively present information to the following: in a one-on-one setting or small group situations for our customers, clients, and/or other employees of the organization.
Mathematical Skills
Must have the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. May need to compute rate, ratio, and percent and to draw and interpret graphs.
Reasoning Ability
Must have the ability to apply common sense and understanding in order to carry out written, oral, and/or diagram instruction forms. Must be able to deal with problems involving several concrete variables in standardized situations.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Physical Activity
Duration
Sitting
Occasionally
Standing
Frequently
Walking
Frequently
Bending (neck)
Frequently
Bending (waist)
Occasionally
Squatting
Occasionally
Twisting (neck)
Occasionally
Twisting (waist)
Occasionally
Climbing
Frequently
Kneeling
Frequently
Crawling
Occasionally
Reaching (above shoulder level)
Frequently
Reaching (below shoulder level)
Frequently
Hand Use
Duration
Repetitive use of hand
Frequently
Simple grasping
Frequently
Power grasping
Frequently
Fine manipulation
Frequently
Pushing & Pulling
Frequently
Vision
Required
Close vision
Yes
Distance vision
Yes
Color vision
Yes
Peripheral vision
Yes
Depth perception
Yes
Adjust focus
Yes
Lifting Requirements
Duration
0-10 lbs.
Frequently
11-25 lbs.
Frequently
26-50 lbs.
Frequently
51-60 lbs.
Occasionally
61+ lbs.
Occasionally
Equipment Use
Duration
This position requires computer use, including monitor, keyboard, mouse, trackball, touchpad, etc.
Occasionally
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Noise Level
The noise level in the work environment is usually:
Loud
Work Environment
Duration
This position operates in a general office or engineering lab environment
Never
Employee will work around machining or on the production floor
Constantly
Employee is exposed to moving mechanical parts and vibration
Frequently
Employee is exposed to hazardous chemicals, fumes or airborne particles
Occasionally
Employee is exposed to outside weather conditions, extreme cold or extreme heat
Frequently
Employee is exposed to risk of electrical shock
Rarely
Summary
Assembler in Training Salary: $19.00/ Hr.
As the largest machine tool builder in the western world, we need world-class talent in all of our departments. And we’re not just looking for people for the production floor. Haas is a very vertically integrated company, with a wide range of high-tech career opportunities available.
Oh, and yes, we are the same Haas that owns the Haas Factory Racing Team, and Haas F1 Team from the Netflix series: Drive to Survive.
The Assembler in Training assembles components and machine tools under direct supervision. This position is responsible for following work instructions, handling materials, and completing basic to intermediate assembly tasks to ensure quality and production schedules are met.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Access and follow daily and weekly production schedules.
Find, read, and follow electronic work instructions (via iPad).
Perform assembly responsibilities, including:
Pulling and packaging parts and materials (kitting).
Connecting and assembling small parts (sub-assembly).
Moving material and washing parts (material handling).
Basic wiring and panel assembly (enclosure).
Packing and cleaning finished components.
Correctly use all required gauges, tools, and equipment.
Identify potential problems and escalate to supervisor.
Operate powered and non-powered material handling equipment including carts, forklifts, pallet jacks, cranes, and mobile straddle stacker lifts.
Follow all safety and quality standards.
Report any equipment or material damage to management.
• Employees are expected to follow instructions, procedures and to escalate any issue impacting workflow, quality, etc.
• Employees must exhibit honesty and integrity as well as demonstrate adherence to rules, procedures and policies.
Qualifications
Qualifications
To perform this job successfully the candidate must be able to perform each essential duty adequately. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Minimum Qualifications
Able to work overtime and Saturdays when business conditions require it.
Desired Qualifications
Basic knowledge of fasteners, threads, and torque wrench use.
Basic knowledge of Bill of Materials (BOMs).
High school diploma or GED.
Experience with electronic devices (iPad).
Education
High school diploma or high school equivalency (HSE) credential such as general education degree (GED) is preferred
Preferred Major
Minimum Years of Experience
0-1 year
Language Skills
Must have the ability to read, write, and comprehend instructions and safety rules; such as work instructions, short correspondence, and memos in English. Must be able to effectively present information to the following: in a one-on-one setting or small group situations for our customers, clients, and/or other employees of the organization.
Mathematical Skills
Must have the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. May need to compute rate, ratio, and percent and to draw and interpret graphs.
Reasoning Ability
Must have the ability to apply common sense and understanding in order to carry out written, oral, and/or diagram instruction forms. Must be able to deal with problems involving several concrete variables in standardized situations.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Physical Activity
Duration
Sitting
Occasionally
Standing
Frequently
Walking
Frequently
Bending (neck)
Frequently
Bending (waist)
Occasionally
Squatting
Occasionally
Twisting (neck)
Occasionally
Twisting (waist)
Occasionally
Climbing
Frequently
Kneeling
Frequently
Crawling
Occasionally
Reaching (above shoulder level)
Frequently
Reaching (below shoulder level)
Frequently
Hand Use
Duration
Repetitive use of hand
Frequently
Simple grasping
Frequently
Power grasping
Frequently
Fine manipulation
Frequently
Pushing & Pulling
Frequently
Vision
Required
Close vision
Yes
Distance vision
Yes
Color vision
Yes
Peripheral vision
Yes
Depth perception
Yes
Adjust focus
Yes
Lifting Requirements
Duration
0-10 lbs.
Frequently
11-25 lbs.
Frequently
26-50 lbs.
Frequently
51-60 lbs.
Occasionally
61+ lbs.
Occasionally
Equipment Use
Duration
This position requires computer use, including monitor, keyboard, mouse, trackball, touchpad, etc.
Occasionally
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Noise Level
The noise level in the work environment is usually:
Loud
Work Environment
Duration
This position operates in a general office or engineering lab environment
Never
Employee will work around machining or on the production floor
Constantly
Employee is exposed to moving mechanical parts and vibration
Frequently
Employee is exposed to hazardous chemicals, fumes or airborne particles
Occasionally
Employee is exposed to outside weather conditions, extreme cold or extreme heat
Frequently
Employee is exposed to risk of electrical shock
Rarely
Job ID: 523532121
Originally Posted on: 6/3/2026
Want to find more Manufacturing opportunities?
Check out the 128,742 verified Manufacturing jobs on iHireManufacturing
Similar Jobs
Sign Up for Job Alerts
