Production Worker Jobs in Arkansas

Job Title: Assembler - 2 Company: Aerojet Location: Camden, AR Description: Performs tasks required to produce solid propellant with moderate supervision. Follows formal written procedures and detailed verbal instructions. Responsibilities: 5% - Performs all duties and tasks required to assemble and prepare products for shipment 70%- Mixes or processes energetic materials while working safely to produce a high quality product. 10% - Maintains records as required for manufactured products. 10% - Maintains a clean and orderly work area. 5% - May be required to coordinate job duties for Assembler 1’s. Secondary Functions: Duties as assigned to assist Production Demands. ENVIRONMENTAL DUTIES 1. Collect, containerize, and label waste chemicals generated as part of production operations. 2. Maintain satellite accumulation areas in a safe and orderly manner and in compliance with environmental regulations. 3. Ensure that Hazardous Waste Control Technician is contacted to have non-energetic chemical wastes moved to the chemical waste handling area (CWHA), and energetic wastes (waste explosives) moved to the energetic waste accumulation areas or the thermal treatment units. 4. Immediately report spills of chemicals and/or process waters to the Environmental department. 5. In the event of an emergency incident, implement the facility Emergency Procedures/Contingency Plan. Qualifications: Arkansas Career Readiness Certificate-Silver Level is required for this position. High school graduate or equivalent. One (1) year experience as an assembler required. Will be exposed to chemicals/propellant. Must be able to work where a variety of conditions exist, including but not limited to: outdoor environments, elevated structures and excavations, shop environments and construction sites. Must customarily have a high consciousness for personnel and equipment safety. May be required to utilize a variety of personal protective equipment. Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).

Job Title: Production Assembler (1832) Company: Esterline Location: East Camden, AR Description: 1832 Job Description OVERVIEW:  Performs repetitive bench or line assembly operations to mass-products such as flares, sliders and other defense items by performing the assigned duties. ESSENTIAL FUNCTIONS:  Assemble flares by wrapping and operating presses that push the flare into the can or press closure caps on the flare.  Apply RTV to flare by holding an air feed hand held unit to dispense RTV as needed.  Assemble other parts with other parts in specified relationship to each other.  Package final units in ammo containers or fiber board boxes.  Perform quality checks such as leak test machines or push out test.  Moving product and materials as needed from storage areas to production areas.  Kitting production materials for use in the production area.  Clean production areas as needed.   MARGINAL FUNCTIONS:  Transfer from one production area to another as needed to support the business.  Paint production areas or other areas as needed. Aid maintenance as needed in facility repairs or upkeep.  Picking up trash around facility.   KNOWLEDGE/SKILLS/EXPERIENCE REQUIRED:  2 – 3 Yrs. Experience in a Manufacturing environment; Some experience with operation of machinery.   MENTAL DEMANDS:  Must be able to follow written and verbal instructions; must be able to work without close supervision.  Must have basic reading and math skills.   PHYSICAL DEMANDS:  Must be able to wear required equipment.   Job Location East Camden, AR, US. Position Type Full-Time/Regular Salary 8.50-14.00 US Dollar (USD)

Job Title: Electro-mechanical Assemblers Company: Location: Little Rock, AR Description: Electro-mechanical assemblers needed to work for a electronic manufacturing firm located in North Little Rock. Ability to read blueprints, drawings and diagrams. Will work in the production department following written procedures and verbal instructions. Must be able to utilize small hand tools and may operate material handling equipment, as well as pallet handlers, forklifts, skids, hand trucks and like equipment. Will prepare in-process or finished good products by performing routine production functions and set up and operate a variety of production equipment used to prepare in-process and finished good products. Requirements: Some experience with electro-mechanical assembly. Able to lift 50 pounds. Hourly, based on experience. Please email, in PDF or ASCII text, your resume to Register to View No Walk-ins, please

Job Title: Machine Operator/ Team Lead Company: Location: Little Rock, AR Description: All American Poly is a plastics manufacturer in North Little Rock, AR. Position: Machine Setup Operator/ Team Leader. Requirements: -Must be able to push, pull, and lift 50+ pounds -Must be able to speak and read fluent English -Bilingual Spanish and English is a plus -Pass math and reasoning skills test -Must have clean criminal record -Submit to drug screening and background check -Must be able to work any shift -Proven mechanical skills -Prior experience in a fast paced manufacturing environment -Must be a fast learner -Have own reliable transportation. No tolerance for poor attendance. -Previous experience in blown film or plastic extrusion is a plus Duties: -Setup production lines based on order specifications and tolerances -Perform regular quality checks on finished products -Supervise packaging of finished products based on order specifications -Accurately record finished good production and waste in computer system -Perform order changes with little waste Please reply to address above with resume or recent work history

Job Title: Production Worker PT 2nd shift Company: Location: Little Rock, AR Description: A high speed wrapping and packaging company has a part time position open at its Little Rock AR. facility on the evening shift. Pay starts at $11.00 per hour with monthly production bonuses. Hours are from 11:30 noon to 7:30 PM 3 days per week. This location is convenient to public transportation and near I-630. The job is in a secure, restricted environment and the nature of our business requires that you must first pass a pre-employment, in addition to random and post accident drug screens later in your employment. You must also pass a thorough background, criminal and credit history investigation. The successful candidate will have a steady and verifiable work history and not a history of short term periods of employment of 2 years or less. You must have experience with heavy lifting in a fast paced environment, operating production machinery, or have some mechanical aptitude, be willing to learn and meet the physical requirements of the position. The job duties require you to continuously lift bags weighing up to 60 pounds to shoulder height unassisted, to fill the wrapping machine hoppers with an average of 300 lifts per shift. You must be able to work 8 hours on your feet, lifting, carrying bending, squatting, operating hand and foot controls in a fast paced environment. The employee must also follow written and verbal instructions, complete simple math functions and paperwork. This position isn?t for everyone, but if you are seeking long term employment, willing to work hard and smart and you meet the above requirements, forward your resume to Register to View and be sure to PASTE your resume with your complete work record and salary history in the body of the e-mail as we do not open attachments, accept phone calls or walk-in applicants. E-mails with attachments will be deleted without review or response. Do not post your resume on this site as a means of applying as it will not be reviewed here.

Job Title: CNC Production Operators Company: Belcan Location: Fayetteville, AR Description: CNC Production OperatorsJob Number: 122411Category: A - Immediate/Urgent NeedDescription: 2nd and 3rd shift Job Opportunity -Operates computer numerical control (CNC) machines to fabricate metallic parts by performing the following duties and other duties as assigned.Reviews setup sheet and specifications to determine setup procedure, machining sequences and dimensions of finished workpiece.Loads part in machine and cycles machine.Listens to machine operation to detect malfunctions, such as worn or damaged cutting tools.Changes cutting tools during machining process as specified in setup specifications.Verifies conformance of finished workpiece to inspection instructions.Uses measuring instruments, such as micrometers, dial indicators and gauges.Run production lots.Operates other equipment as necessary.Communicate with co-workers and supervisor.Maintain a safe and well cleaned work environment.Requirements: High School diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals.Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.Must have valid NC Driver's LicenseThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to handle, or feel objects, tools, or controls and reach with hands and arms. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch or crawl; and talk or hear.The employee must regularly lift and/or move up to 5 pounds, frequently lift and/or move up to 30 pounds and occasionally lift and/or move up to 60 pounds.Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and the ability to adjust focus.Location: Selma , NCMinimum Experience (yrs):Required Education: Not SpecifiedBenefits:

Job Title: Food Production Worker - NH PRN / Patient Food Service Company: Washington Regional Location: Fayetteville, AR Description: Shift Details: This position will be working on trayline in the kitchen, scraping dishes and delivering food carts to floors and other duties as assigned. Degree Required: High School/GED Job ID: Register to View .02377 Years Experience: 1 Note: Please read the complete description below before applying for this job. Complete Description This position is responsible for functions in the areas of service, sanitation and cleaning. These duties include: dishwashing, tray assembly, tray delivery, and preparing foods. This position has exposure to extremes in noise and temperature, cleaning chemicals and equipment as normally related to food service production areas. Majority of the time is spent standing and or walking (up to 80% of work time), frequent lifting and carrying of up to 50 lb (up to 30% of work time) and pushing/pulling up to 100 lb. (up to 30% of work time) is required. Qualifications Good communication skills, as usually associated with successful completion of high school studies. Additional Information Weekend and/or Holiday Rotation may be required. Rotating Shifts may be required. How To Apply: Click on the "Apply" button below to apply online: Washington Regional   See all jobs in FAYETTEVILLE AR

Job Title: Manufacturing Operator Company: Location: Fayetteville, AR Description: Im looking for a person who is willing to work in whatever dept in order to complete the product. This would include preparing the product for shipping. Must be a team player and get along well with all types of personalities.

Job Title: CNC Machine Operator/Shop Assist Company: Belcan Location: Fayetteville, AR Description: CNC Machine Operator/Shop AssistantJob Number: 123370Category: A - Immediate/Urgent NeedDescription: PART-TIME - 20-30 hrs. a week; must be familiar with running CNC machinery - other shop duties as assigned; several months in duration possibly longerLocation: Garner , NCMinimum Experience (yrs):Required Education: Not SpecifiedBenefits:

Job Title: Production Manufacturing Operator Company: Unilever Location: Little Rock, AR Description: Unilever's mission is to add Vitality to Life. We meet everyday needs for nutrition, hygiene and personal care with brands that help people feel good, look good and get more out of life.Unilever is among the Top 70 of the Fortune Global 500 Companies. We are also one of the world's leading suppliers of fast moving consumer goods in foods, household and personal care products. Our purpose is to meet the everyday needs of people everywhere – to anticipate the aspirations of our consumers and customers and to respond creatively and competitively with branded products and services, which raise the quality of life.  Production Manufacturing Operator   Position Summary: Machine Operator. Performs production activities requiring the operation of one or more machines/equipment in support of an entire manufacturing or process system and assuming various team roles in a team based environment. Understands production processes and safety and quality goals/standards.  Position Responsibilities: 1. Responsible for following Unilever safety, health and environment regulations. 2. Performs a wide variety of production activities requiring in-depth knowledge of a variety of related processes, operations, equipment and assumes various team roles in a team based environment. Examples: Knowledge of multiple machine operations and material handling. 3. Under limited supervision assists in providing guidance/training to less experienced operators in the operation of equipment and processes. 4. Demonstrates leadership in support of the effective delivery of plant and team results. Recognized as a technical expert in one or more production system and capable of effectively operating a variety of machines. 5. Able to use a computer to perform a variety of operational functions and reports. 6. Troubleshoots more complex equipment/process problems and prepares recommendations for improvements in methods or processes relative to improved productivity and quality. 7. Performs equipment change over’s and minor equipment maintenance. 8. Accurately completes a variety of paperwork/documentation. 9. Reads and comprehends work instructions and may assist in the development of systems and procedures. 10. Responsible for performing housekeeping and sanitation duties and other duties as assigned.  Education: High School diploma or equivalent  Experience: Requires one year manufacturing experience. Requires a broad working knowledge of operational systems, machines, manufacturing and/or process systems and an in-depth knowledge of a variety of related processes, operations and equipment normally obtained through at least 1 year of experience. Experienced in operating a variety of machines. Must read and comprehend written specifications in the English language. Must be able to accurately communicate information verbally and in writing. Must be able to respond to random events and resolve operating problems.  Assignments require: • Standing on a concrete floor and wearing proper PPE (i.e. hair net, bump cap, ear plugs, sanitary gloves, and safety shoes). • Willing and able to work overtime, to adapt to abrupt schedule changes, to accept second or third shift, accept 8 or 12-hour schedules and weekend work assignments. • Occasional bending, stooping, reaching, climbing stairs, and minor lifting (• Some assignments require frequent walking. • Some assignments include occasional exposure to excessive heat and cold similar to outside temperatures • Forklift assignment requires getting on and off forklift frequently.   Please apply for this position at www.unileverusa-careers.com or call Unilever Peoplelink Register to View  Or please click the following link or copy and paste it into your browser:  https://recruitment.unileverservices.com//MAIN/careerportal/job_profile.cfm?szOrderID=22834  Unilever is an equal opportunity employer.  It prohibits discrimination based on age, color, disability, marital or parental status, national origin, race, religion, sex, sexual orientation, gender identity, veteran status or any other legally protected status in accordance with applicable federal, state and local laws. Employment is subject to verification of pre-employment drug-screening results and background investigation.